Slate roof, White wash walls, Pale blue windows and doors, Herringbone base
We have reduced this product slightly due to an ill fitting back pocket.
Our Original stable was the starting point for our company. With its distinctive carry handle built into the roof, and rear pockets allowing for easy access to a loft area. The Stable-house provides ample room for a number of children to play together from all sides. We have tried to build as many doors and windows into it’s design for little hands to explore and play with.
The ground floor accommodates two single stables at each end, with front facing stable doors and long side windows. The double centre doors open inwards to a tack and food store. A ladder is provided as standard with all our Stables, as it’s going to be needed for our imaginary explorers to gain access from the food store via the loft trap door which opens out into the spacious upper house play area.
The stable has been created using quality birch faced ply and all brass finishing's. The whole stable is securely mounted onto it’s birch base which comes as a standard with either a herringbone brick detail or flagstone detail fronting the stable doors.
The underside of the base is fitted with Flotex™ glider pads as standard, helping to protect floors and other surfaces from scratching. Each house has our Grovely Wood ® ‘Acorn-bell’ embossed into the base to prove providence.
The handy carry handle allows grown ups to easily transport the stable, having first popped all those lose toys, accessories and horsy occupants in behind the doors and pockets. (Acts as an ideal repository for tidying away toys at the end of a busy play day).
Although we wouldn't recommend leaving the toy outside for prolonged periods, its great for outside play and will keep its owners pleasantly occupied. Should an occasional light shower catch you unawares, then the tough oil and wax coating of Osmo® should protect the wood from any major damage.
With our extensive range of colours for the roof, side, doors/windows and base, why not choose a colour and finish to produce a truly individual item with a Custom stable.
The stock Original Double Stable comes supplied with a birch loft ladder and two hay nets.
|Dimensions and Weight|
|Centimeters and Kilograms||width = 45cm Length = 92.3cm height = 52.3cm weight = 11kg|
|Osmo natural waxes and oils||All of our toy stables and accessories will have had at least two protective coatings of Osmo® (Osmo® uses all natural waxes and oils), the coating will allow the natural beauty of the birch grain to be retained. Up to three coats of Osmo will be applied, and the overall finish will require at least three weeks to harden sufficiently, giving the toy increased durability. Osmo® forms an extremely hardwearing, dirt-resistant and water repellent surface. Although we carry a small range of built stable-houses we encourage individuality. So why not select your own choice of roof, walls and base to produce a distinctly individual toy. As every sheet of birch ply will react slightly differently to the number of clear or tinted Osmo® coatings applied, and also the level of pressure and gauge of sanding materials between coats, this means that each and every toy stable (stable-house) will have a truly unique appearance. Please note: Due to all of our toys being hand finished to specific colour requirements and individual specifications, we cannot accept responsibility for colour or texture variations from product to product.|
|Fixtures and Fittings||All of the hinges, screws and door knobs on our stables are made from solid brass. The hinges have all had their corners hand sanded to fit neatly into their recessed positions - giving a quality flushed fit. The screws are then held firmly in place with solid brass nuts. (Please note, these will need checking over time - spares will be provided with each stable.) The solid brass door knobs are standard, and we also provide two brass hey net rings fitted to the outside wall.|
|Please Note:||Due to all of our toys being hand finished to specific colour requirements and individual specifications, we cannot accept responsibility for colour or texture variations from product to product.|
Original Double Stable - Slate / White wash / Pale blue
- Product Code: Original Double Stable - Slate / White wash / Pale blue
- Availability: 1
All our hand crafted products are made to 1:10 scale. All the pictures on our site are displayed with our own range of horses and wooden toy furniture.
Delivery…….. Click here for full delivery details
Please bare in mind that it takes us up to three weeks to produce each stable.
Once cut, they will require at least two coatings of Osmo® oil & wax which needs sufficient time to harden between coats. Whilst we try and maintain a good stock of pre-prepared selection of stables in the most popular tints, fitting doors, windows and mounting onto their chosen bases will require a few days. We will do our best to despatch your order within 14 days or sooner. However, this period may be extended during busy periods such as the lead up to Christmas.
We appreciate that there will be times when this delay won’t be acceptable for those upcoming special events, so we always try and keep a limited range of ‘off the shelf’ stock for those more immediate deliveries. We would advise, however, that you contact us direct to check on our day to day availability as we only update this ‘off the shelf’ list weekly.
All our toys are for a recommended age +3